Large Wire Resin Tree

Large 3D Wire Resin Tree

Now I have made one large resin tree, I'm set to make a few more as I enjoyed the learning process and end results greatly.

1st Stage - Set out the Tree and base mold and half fill with resin, this way I can eliminate most of the air bubbles with my gas lighter. If I fill the mold completely too many air bubbles will get trapped and I don't really like the overall effect it gives at completion. (Of course all air bubbles would be eliminated if I had a de-gassing chamber but I don't at the moment so this method will serfice for now)
I filled the mold with thin wire that I bent into shapes to fit the branches and the trunk of the tree, it gives a mythical feel to the piece and its an idea I have not tried before, it may or may not work we will have to wait and see at the end!
I now let the resin cure for about 12 hours then I will do the final pour on this side of the mold, not too sure if its going to be a colour or colour and mylar flakes!!

2nd Stage - Background colour, I decided I would use two colours in the end - shimmering green and shimmering copper. I quite like the effects it gives once dry, this is very different to anything I have done as i'm thinking outside the box on this project.

3rd Stage - Coating the back of the tree with dark brown resin, so that the green and cooper colours will have a solid background for their shimmering colours to show through from the front side.

4th Stage - The tree has had its final coat of clear resin on the front. The first picture taken with my camera was with the flash on, so it shows up the shimmering green and brown in the design.I also love the way the wire dominates the foreground with its swirling silver patterns.

5th Stage - Assembly of the tree and base - Now a completed tree ready for hanging your jewellery on or just put in a sunny window to catch the light and admire!.

Close up showing the twirling wire inside the resin

Sea Glass Resin Tree

Now for a Bigger Tree!

Now to try something bigger and bolder. I made this mold last year and have not tried it out till now. I'm going to try and make a "Sea Glass Jewellery Tree" with stand. It measures 28cm high by 21cm wide - this should be fun!!

1st Stage - First I Laid out my tree mold, then poured the prepared resin into the mold after which I add the various sizes of coloured sea glass until the mold is completely filled.

2nd Stage - After the resin has cured in the mold for 24 hrs I demold it and lay it flat onto some silicone sheets. Now I give it a top coat to even out the layer.Then once this coat of resin has cured I need to turn it over and do the same on the other side but I will have to wait 24 hrs before I can turn it over. So far I have spent an hour altogether making this, but waiting 2 days in between for drying time - its no quick process unfortunately!!

I love the way the sea glass comes alive showing its vibrant colours just like when I spot it for the first time on the shore. I also love the fact that the sea glass I find has been rolling and crashing around in the sea for 60 years or more to get to that frosty pummeled stage and that each piece of sea glass carries a history of how it came to be and where its been!!

At last finally finished my "Sea Glass Tree" it took 3 hours but 5 days of waiting for the resin to cure between each layer, I'm pleased with my first result. This tree could be used to hang your jewellery on, or just placed in a sunny window to show of the coloured glass.
I will be selling this tree for £20 because of the work involved making the tree not to mention hunting for blue sea glass on the beach, hours and hours looking for those rare pieces of blue! The tree measures 28cm high by 21cm wide.

The Finished Tree

"Dreaming of the Sea" Tree

Dreaming of the Sea 3D Resin Tree Tutorial.

Started on another 10cm high 3D tree, this time "Dreaming of the Sea" with deep blue resin, iridescent mylar flakes, sea glass from my local beach, shells and sea charms.

1st Stage - Pouring the resin and mylar flakes into the tree molds.

2nd Stage - add the sea charms and fix together, pleased with how this tree came out.

"Make a Wish" Resin 3D Tree with Mica Flakes

Making a 3D Resin Tree Tutorial

Started another 3D Tree project today, this time I'm using a solid colour of green resin and iridescent mica flakes with "Make a Wish" charms, which I will put on the outside of the resin tree this time to give more of a relief effect.

1st Stage - Pouring green resin and mica flakes into the two tree molds, then putting in a "Make a Wish" round charm into the star mold of which I have put into clear resin so you can see the charm and tiny silver stars.

2nd Stage - Next part of the green 3D resin tree is to take both halves out of their molds, put a thin coat of resin over the top and arrange the "Make a Wish" charms over the trees surface. Once this is dry I can turn them over and coat with resin as before and add more charms.

3rd Stage - All finished off, pleased with how this first Wish Tree turned out.

£4.50 + P&P £2.50  Tree dimensions are 10 x10 cm's.

You can see more of my creations on my Facebook page (artyResin) at;

https://www.facebook.com/SuesartyResin

Resin Button Trees

New Project Idea for Christmas - 3D "Button Tree" Tutorial


I started on a new project this week - resin trees, (I know its a tad early for Christmas) but I thought these may be good for the sewing crafters amongst you or for your friends - something different to hang on the tree!! 

1st Stage - pouring the resin into the tree and star molds, then filling with miniature buttons and silver tone sewing charms.

2nd Stage - Just taken the 3D tree out of it's mold, looks good so far. I have had to put a thin coat of resin on one side as the mold tends to come out opaque looking on the side that you pour the resin onto. A bit fiddly to do but I'm sure it will be worth it, I have lots of ideas for these little trees!!

3rd Stage - Finished "Button Tree"  pleased with how my first attempt came out. I think I will use solid colours next time, as you can see the back of the charms when you look from the other side and they are not all double sided charms. I'm going to try a "Make a Wish Tree" next and put the charms on the outside of the tree rather than embed them in the resin.

"Dreaming of the Sea"

"Dreaming of the Sea Jewellery"

I have been making lots of sea theme jewellery these last few months and I have loved every moment.

Recent trips to my local beach have uncovered an abundance of sea glass and pretty shells, 

I mainly find greens, whites and browns, but have found the odd blues and pale purples too.

I didn't realise how long a piece of glass has to be churning over and over in the sea to reach its pitted stage of true sea glass, its 50 to 100 years surprisingly enough!

I love the fact that a piece of glass could have come from any where in the world and each individual piece holds a history and it's own story.

My recent makes ready for a craft fair in September.